QUESTION 24
You have 30 servers that run Windows Server 2012 R2.All of the servers are backed up daily by using Windows Azure Online Backup.You need to perform an immediate backup of all the servers to Windows Azure Online Backup.
Which Windows PowerShell cmdlets should you run on each server?
A. Get-OBPolicy | StartOBBackup
B. Start-OBRegistration | StartOBBackup
C. Get-WBPolicy | Start-WBBackup
D. Get-WBBackupTarget | Start-WBBackup
Correct Answer: A
Explanation:
This example starts a backup job using a policy.
Windows PowerShell
PS C:\> Get-OBPolicy | Start-OBBackup
Incorrect:
Not B. Registers the current computer to Windows Azure Backup.
Not C. Not using Azure
Not D. Not using Azure
Saturday, 26 November 2016
Friday, 18 November 2016
Get Microsoft 70-412 Exam Question
Question 23
Your network contains two DNS servers named DN51 and DNS2 that run Windows Server 2012 R2. DNS1 has a primary zone named contoso.com. DNS2 has a secondary copy of the contoso.com zone. You need to log the zone transfer packets sent between DNS1 and DNS2. What should you configure?
A. Monitoring from DNS Manager
B. Logging from Windows Firewall with Advanced Security
C. A Data Collector Set (DCS) from Performance Monitor
D. Debug logging from DNS Manager
Correct Answer: D
Explanation:
Debug logging allows you to log the packets sent and received by a DNS server. Debug logging is disabled by default, and because it is resource intensive, you should only activate it temporar- ily when you need more specific detailed information about server performance. Reference: Active Directory 2008: DNS Debug Logging Facts...
Your network contains two DNS servers named DN51 and DNS2 that run Windows Server 2012 R2. DNS1 has a primary zone named contoso.com. DNS2 has a secondary copy of the contoso.com zone. You need to log the zone transfer packets sent between DNS1 and DNS2. What should you configure?
A. Monitoring from DNS Manager
B. Logging from Windows Firewall with Advanced Security
C. A Data Collector Set (DCS) from Performance Monitor
D. Debug logging from DNS Manager
Correct Answer: D
Explanation:
Debug logging allows you to log the packets sent and received by a DNS server. Debug logging is disabled by default, and because it is resource intensive, you should only activate it temporar- ily when you need more specific detailed information about server performance. Reference: Active Directory 2008: DNS Debug Logging Facts...
Tuesday, 2 August 2016
Microsoft 70-412 Exam Study Material
Question 22
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed.The network contains client computers that run either Linux, Windows 7, or Windows 8. You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)
You plan to configure Name Protection on all of the DHCP servers.
You need to configure the adatum.com zone to support Name Protection Which two configurations should you perform from DNS Manager?
(Each correct answer presents part ofthe solution. Choose two.)
A. Sign the zone.
B. Store the zone in Active Directory.
C. Modify the Security settings of the zone.
D. Configure Dynamic updates.
E. Add a DNS key record
Correct Answer: BD
Explanation:
Name protection requires secure update to work. Without name protection DNS names may be hijacked.You can use the following procedures to allow only secure dynamic updates for a zone. Secure dynamic update is supported only for Active Directoryintegrated zones. If the zone type is con- figured differently,
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed.The network contains client computers that run either Linux, Windows 7, or Windows 8. You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)
You need to configure the adatum.com zone to support Name Protection Which two configurations should you perform from DNS Manager?
(Each correct answer presents part ofthe solution. Choose two.)
A. Sign the zone.
B. Store the zone in Active Directory.
C. Modify the Security settings of the zone.
D. Configure Dynamic updates.
E. Add a DNS key record
Correct Answer: BD
Explanation:
Name protection requires secure update to work. Without name protection DNS names may be hijacked.You can use the following procedures to allow only secure dynamic updates for a zone. Secure dynamic update is supported only for Active Directoryintegrated zones. If the zone type is con- figured differently,
Wednesday, 27 July 2016
Microsoft 70-412 Exam Dumps Study Material
Question 21
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is re- served for private networks. The addresses must be routable.Which IPV6 scope prefix should you use?
A. 001:123:4567:890A::
B. FE80:123:4567::
C. FF00:123:4567:890A::
D. FD00:123:4567::
Correct Answer: D
Explanation:* A unique local address (ULA) is an IPv6 address in the block fc00::/7, defined in RFC 4193. It is the
approximate IPv6 counterpart of the IPv4 private address. The address block fc00::/7 is divided into two /8
groups:
/ The block fc00::/8 has not been defined yet.
/ The block fd00::/8 is defined for /48 prefixes, formed by setting the 40 least-significant bits of the prefix to
a randomly generated bit string.
* Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges:
/ They are not allocated by an address registry and may be used in networks by anyone without outside
involvement.
/ They are not guaranteed to be globally unique.
/ Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be delegated in
the global DNS.
Reference: RFC 4193
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is re- served for private networks. The addresses must be routable.Which IPV6 scope prefix should you use?
A. 001:123:4567:890A::
B. FE80:123:4567::
C. FF00:123:4567:890A::
D. FD00:123:4567::
Correct Answer: D
Explanation:* A unique local address (ULA) is an IPv6 address in the block fc00::/7, defined in RFC 4193. It is the
approximate IPv6 counterpart of the IPv4 private address. The address block fc00::/7 is divided into two /8
groups:
/ The block fc00::/8 has not been defined yet.
/ The block fd00::/8 is defined for /48 prefixes, formed by setting the 40 least-significant bits of the prefix to
a randomly generated bit string.
* Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges:
/ They are not allocated by an address registry and may be used in networks by anyone without outside
involvement.
/ They are not guaranteed to be globally unique.
/ Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be delegated in
the global DNS.
Reference: RFC 4193
Wednesday, 4 May 2016
70-412 Microsoft Exam Dumps Question
70-412 Question 20
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
An administrator installs the IP Address Management (IPAM) Server feature on a server named Server2.
The administrator configures IPAM by using Group Policy based provisioning and starts server discovery.
You plan to create Group Policies for IPAM provisioning.
You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group Policies.
What should you do on Server2?
A. From Server Manager, review the IPAM overview.
B. Run the ipamgc.exe tool.
C. From Task Scheduler, review the IPAM tasks.
D. Run the Get-IpamConfiguration cmdlet.
Correct Answer: D
Explanation/Reference:
Example:
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
An administrator installs the IP Address Management (IPAM) Server feature on a server named Server2.
The administrator configures IPAM by using Group Policy based provisioning and starts server discovery.
You plan to create Group Policies for IPAM provisioning.
You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group Policies.
What should you do on Server2?
A. From Server Manager, review the IPAM overview.
B. Run the ipamgc.exe tool.
C. From Task Scheduler, review the IPAM tasks.
D. Run the Get-IpamConfiguration cmdlet.
Correct Answer: D
Explanation/Reference:
Example:
Wednesday, 30 March 2016
Microsoft 70-412 Exam Dumps
70-412 Question 19
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role in- stalled. Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.)
You need to assign a user named User1 permission to add and delete records from the contoso.- com zone only.
What should you do first?
A. Enable the Advanced view from DNS Manager.
B. Add User1 to the DnsUpdateProxy group.
C. Run the New Delegation Wizard.
D. Configure the zone to be Active Directory-integrated.
Correct Answer: D
Explanation/Reference:
Secure dynamic updates are only supported or configurable for resource records in zones that are stored in Active Directory Domain Services (AD DS).
Note: To modify security for a resource record
1. Open DNS Manager.
2. In the console tree, click the applicable zone.
3. In the details pane, click the record that you want to view.
4. On the Action menu, click Properties.
5. On the Security tab, modify the list of member users or groups that are allowed to securely up- date the applicable record and reset their permissions as needed.
Reference: Modify Security for a Resource Record
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role in- stalled. Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.)
What should you do first?
A. Enable the Advanced view from DNS Manager.
B. Add User1 to the DnsUpdateProxy group.
C. Run the New Delegation Wizard.
D. Configure the zone to be Active Directory-integrated.
Correct Answer: D
Explanation/Reference:
Secure dynamic updates are only supported or configurable for resource records in zones that are stored in Active Directory Domain Services (AD DS).
Note: To modify security for a resource record
1. Open DNS Manager.
2. In the console tree, click the applicable zone.
3. In the details pane, click the record that you want to view.
4. On the Action menu, click Properties.
5. On the Security tab, modify the list of member users or groups that are allowed to securely up- date the applicable record and reset their permissions as needed.
Reference: Modify Security for a Resource Record
Saturday, 26 March 2016
Get Microsoft 70-412 Exam Question
70-412 Question 18
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers to DHCP
clients. The solution must minimize administrative effort.
What should you do?
A. Create a superscope and scope-level policies.
B. Configure the Scope Options.
C. Create a superscope and a filter.
D. Configure the Server Options.
Correct Answer: B
Explanation/Reference:Any DHCP scope options can be configured for assignment to DHCP clients, such as DNS server.
Reference: Configuring a DHCP Scope
http://technet.microsoft.com/en-us/library/dd759218.aspx
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
clients. The solution must minimize administrative effort.
What should you do?
A. Create a superscope and scope-level policies.
B. Configure the Scope Options.
C. Create a superscope and a filter.
D. Configure the Server Options.
Correct Answer: B
Explanation/Reference:Any DHCP scope options can be configured for assignment to DHCP clients, such as DNS server.
Reference: Configuring a DHCP Scope
http://technet.microsoft.com/en-us/library/dd759218.aspx
Subscribe to:
Comments (Atom)